0

I see that in a 4 electrode ECG (LA, RA, LL, RL) we can measure upto 6 Leads (LeadI, LeadII, LeadIII, AvR, AvL, AvF). What increase in value does adding an additional chest electrode like V2 provide?

What percentage of the heart activity is captured with a 4 electrode system vs a 5 electrode system?

1
  • 4
    Welcome to MedicalSciences.SE! Please take the tour and read the help center. For reasons mentioned in this post and in How to Ask, we require prior research information when asking questions. See this list of helpful resources. Please help us to help you and edit your question to provide more information on what you have read on this subject, what made you ask this question, and any problems you are having understanding your research. If you found nothing, what did you Google? – Carey Gregory Jun 11 '19 at 22:25
3

Wilson leads (normally V1-V6) are so called unipolar leads: that means that 3 extremities' electrodes are put together over a high resistance to a so called "indifferent" electrode, against which you can record electrical activity to pretty much any point of the body. So, as you correctly stated, you need 3 extremities' leads RA, LA, LF (+ ground RF of course) for the imaginary 0 electrode, if you add a V2 you will get a lead with a main vector pointing from approximately middle of the chest towards the 4th ICR left parasternal (position of V2 electrode). This won't give you much information though since you can't really compare this lead to any of vertical leads (Einthhoven and Goldberger), that is why you do 6 Wilson leads to display the whole horizontal vector projection.

As for your question about the "percentage of heart activity", it is a slightly wrong understanding of the idea of ECG. Technically you just need 2 electrodes to record the whole electrical activity, the question is what those 2 electrodes are and what does their recording show compared to other leads. For a complete, unspecific description of heart activity the standard is a 12-channel ECG.

Decide if you wish to dig into the electrophysiological background of ECG, for a complete understanding of this examination technique you should do that, here's a good example of a book you can use (it's in German though), or take any other good physiology textbook Lehrbuch Physiologie; Hans-Christian Pape, Armin Kurtz, Stefan Silbernagl; 7. Auflage; Stuttgart; New York : Georg Thieme Verlag, [2014]

5
  • I would like to detect any abnormal heart condition, so compared to 4 Lead would 5 Lead detect more conditions? – Miguel Sanchez Jun 13 '19 at 14:11
  • @MiguelSanchez it is possible that in the additional 5th lead you would see an abnormal curve - which alone is nevertheless not enough to diagnose a particular problem - and vice versa - the one (e.g. V2) lead might be clean, but in, say, V5/V6 you could see a pathological change (that's actually a realistic example for a LBBB - left bundle branch block). – practiZ Jun 14 '19 at 4:01
  • @MiguelSanchez but technically - yes - 5 leads provide more information than 4 leads; my point is that both is not enough. – practiZ Jun 14 '19 at 4:04
  • Hi, is there a table / chart that represents what lead detects which abnormal functioning of the heart? – Miguel Sanchez Jun 14 '19 at 5:10
  • @MiguelSanchez no. ECG interpretation is a complex task that requires a lot of background as well as clinical knowledge and is to only be performed by a physician. – practiZ Jun 14 '19 at 12:15

Not the answer you're looking for? Browse other questions tagged or ask your own question.